Bradex Holts Easy Start Lubricant 300ml

• Starts all engines fast, including both petrol and diesel
• Quick and easy to use
• Works down to -20°C
• No damaging effect

The product can be used on multiple engine types including:

• Cars
• Vans
• Motorbikes
• Lorries
• Lawnmowers
• Tractors and agricultural machinery
• Generators and industrial machinery

How to Use:

Ensure that the vehicle or equipment you’re trying to start is in a well-ventilated area and parked safely with the ignition turned off.

Before using the spray, shake the can thoroughly to ensure that the contents are well-mixed. This step helps to achieve consistent performance when spraying.

Identify the air intake system of the engine. This is typically located near the air filter housing or intake manifold. You may need to consult the vehicle’s manual if you’re unsure about its location.

Petrol Engines:

Spray the product directly into your car’s air intake for 1-2 seconds. Then, attempt to start the engine by turning the key. You should find that the engine fires more quickly.

Diesel Engines:

If you drive a diesel, you’ll need another person to help you use Bradex Easy Start to get your engine firing. That’s because you need to turn the key while Bradex is being sprayed into the air intake. Spray the product for 1-2 seconds while turning the key. 

Be careful not to spray too much, as excessive spraying can flood the engine.

If the engine doesn’t start on the first attempt, you can repeat the process by spraying another short burst of Bradex Easy Start into the air intake and attempting to start the engine again.